Mac OSX Installation
|Revision as of 16:55, 25 June 2011
Pyl (Talk | contribs)
(→10.6 with rew)
← Previous diff
|Revision as of 16:57, 25 June 2011
Pyl (Talk | contribs)
Next diff →
|Line 54:||Line 54:|
|This is only a recipe, first install brew and the packages, then gerris from source.||This is only a recipe, first install brew and the packages, then gerris from source.|
|-||= Install "brew" =|
|-||installation of brew ( see the exact procedure on the web page, it changes)|
|== X11 on MacBook: you need a three-button mouse or trackpad emulation ==||== X11 on MacBook: you need a three-button mouse or trackpad emulation ==|
Revision as of 16:57, 25 June 2011
Mac OS X 10.6 Snow Leopard (Intel) Installation with MacPorts
Gerris installs and works fine on Snow Leopard. In you're using gfortran AND if you migrated your old data (from Leopard or Tiger), take care to update your gfortran installation. As of Apr 16, 2011, the standard way to install is using MacPorts. If you had fink previously installed and wish to use MacPorts you should uninstall the fink stuff, remove the /sw library and modify the environment variables accordingly.
Be careful that the ACLOCAL path is set like:
export ACLOCAL_FLAGS="-I/opt/local/share/aclocal $ACLOCAL_FLAGS"
You should also take care to avoid conflicts with libraries that may have been installed elsewhere. One way to avoid the conflicts is to set the MacPorts library first in the PKG_CONFIG_PATH variable.
The Gerris configure will read this variable and get the right MacPort libraries. There is in fact a whole lot of other environment variables that should be set to use with MacPorts to paths starting with /opt/local, read the MacPorts documentation.
The packages must installed as in
sudo port install pkgconfig glib2 gtkglext startup-notification gawk ffmpeg
If you get an error like
libtool: Version mismatch error. This is libtool 2.2.4, but the libtool: definition of this LT_INIT comes from an older release. libtool: You should recreate aclocal.m4 with macros from libtool 2.2.4 libtool: and run autoconf again.
uninstall the libtool port:
sudo port uninstall libtool
and rerun the installation starting with
sh autogen.sh --prefix=/opt/gerris
This should take you through gerris installation. The gfsview installation proceeds in a similar way.
There were difficulties in the past with gfsview installation because of conflicts with gtk2 and gtkglext packages, but as of Apr 16, 2011 the MacPorts packages are working fine. See the discussion page for a record of these problems and how they were solved.
Mac OS X 10.6 Snow Leopard (Intel) Installation with "brew"
This is only a recipe, first install brew and the packages, then gerris from source.
X11 on MacBook: you need a three-button mouse or trackpad emulation
You need either to connect a three-button mouse to your Mac or have the middle and right-click functions of a mouse emulated on the trackpad. Go into the X11 application (it can be reached inside your Dock) then under the X11 menu go into "Preferences" and select "emulate a three button mouse".
Then press the "Command" (cmd) key and move ONE finger on the trackpad while clicking on the trackpad to emulate the right-click on the mouse and move around the gfs view. Press the "Command" (cmd) key and move TWO fingers on the trackpad to emulate the center-click on the mouse or the scrolling, to zoom in and out these pretty gfsview images ...
Mac OS X 10.5 (Intel) Installation with fink
The instructions below for 10.4 should work but there is an OpenGL bug in Xcode 3.0. Either upgrade to Xcode 3.1 or later, or use the following fix when configuring/compiling gfsview:
cd ../gfsview-stable LDFLAGS="-Wl,-dylib_file,/System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib:/System/Library/Frameworks/OpenGL.framework/Versions/A/Libraries/libGL.dylib sh autogen.sh --prefix=/opt/gerris make && make install
Mac OS X 10.4 (Intel) Installation with fink
Below are steps that have worked for at least three people, installing Gerris under Mac OS X 10.4 (Intel).
- You will need the Apple development tools installed - this is a free download from http://developer.apple.com/tools/.
- Check that you have Apple's X11 and the X11 SDK installed. They are not installed by default on a new machine (at least as far as I could figure out). If X11 is not installed, in OS X 10.4 you need to reinstall your system from the DVD (See here). Reinstalling the system will not remove your user files. (For comparison, on my system, the versions were X11 1.1.3 - XFree86 4.4.0 .)
- Install Fink (http://finkproject.org).
- Install various dependencies that Gerris requires.
sudo fink install pkgconfig glib2 glib2-dev glib2-shlibs gtk+2 gtk+2-dev \ gtkglext1 startup-notification-dev \ startup-notification-shlibs
Other packages may also be necessary. Look at the error messages during the configuration steps below to see what packages may be missing. Then the best way to resolve the problem may be to install "fink commander". Then search for all the packages that have a name beginning with pango, gtk+, atk1 and install all of them. Trial and error should eventually lead you to a full installation of all the necessary packages.
- Install darcs (needed to obtain the latest version of Gerris, GTS, and GfsView - the packaged versions available on the web do not work). Darcs is not available in Fink either.
- Download the DMG from http://glozer.net/darcs/, and mount it.
- From the DMG, Drag GMP.Framework into /Library/Frameworks.
- From the DMG, put the 'darcs' executable wherever you wish (e.g. /usr/local/bin).
- From a suitable folder, obtain the latest versions of GTS, Gerris, and GfsView.
darcs get http://patch-tag.com/r/popinet/gerris-stable darcs get http://gts.sf.net/darcs/gts-mainline darcs get http://patch-tag.com/r/popinet/gfsview-stable
- We will install these in /opt/gerris to keep them isolated from the rest of the system. This requires /opt/gerris/lib/pkgconfig to be added to your PKG_CONFIG_PATH. This directory does not exist yet - it will be created in the next step.
echo "export PKG_CONFIG_PATH=$PKG_CONFIG_PATH:/opt/gerris/lib/pkgconfig" >> ~/.profile
- Check your version of automake:
% automake --version
Currently (November 8, 2007) this installation procedure works with automake 1.6.3 which is on your system by default. Any later version should also work.
- Add the gerris directory to your path (so gts-config works properly), also add the fink directory.
echo "export PATH=$PATH:/opt/gerris/bin:/sw/bin" >> ~/.profile
- Compile and install GTS, Gerris and GfsView.
cd gts-mainline sh autogen.sh --prefix=/opt/gerris make && make install cd ../gerris-stable sh autogen.sh --prefix=/opt/gerris make && make install cd ../gfsview-stable sh autogen.sh --prefix=/opt/gerris make && make install
- Test your installation. Beware of end of line characters.
- You're done !
If we want to generate MPEG movies using ppm2mpeg we will need ffmpeg which is not available in Fink stable, so we must install it manually.
- Download the latest SVN snapshot from http://ffmpeg.org/releases/
- Unpack and install it.
tar -xvjf ffmpeg-export-snapshot.tar.bz2 cd ffmpeg-export-<insert date here> ./configure --prefix=/opt/gerris make && make install